Kidswear Manufacturers for 150–200 Pieces per Style: Who Should You Contact for a Launch?

Kidswear Manufacturers for 150–200 Pieces per Style are often exactly what a new children’s brand needs: a supplier that can support genuine customization without forcing you into inventory levels designed for a national retailer. If you are planning a first collection of four to eight styles, a 150–200-piece quantity can give you enough stock to launch properly while still protecting cash flow and leaving room to learn from real sales data.

The challenge is that “low MOQ” means very different things from one factory to another. One supplier may accept 100 pieces only if you use an existing blank. Another may accept 100 pieces per style per color, which can turn a two-color style into 200 pieces immediately. A third may be willing to sew 150 units, but the fabric mill may require enough material for 500.

At SIUKID, when we review a smaller launch, we do not look at the garment quantity in isolation. We look at the style, fabric, color count, size range, decoration, trims, labels, packing, and whether the materials can be sourced efficiently at the proposed volume. That is the same approach I would recommend you use when comparing factories.

This guide is designed for founders, online retailers, boutique brands, and wholesalers preparing a real launch—not simply collecting supplier names. I will show you which manufacturers are worth contacting, what their published MOQ structure currently looks like, and how to design a 150–200-piece order so that the factory can actually execute it well.

Quick takeaway: For a launch in this range, I would start by speaking with SIUKID, Alamby Fashion, Hongyu Apparel, MoonYao Kids, and Lezhou Garment. They are not interchangeable. Your product category, color structure, fabric plan, and customization level should determine who stays on your shortlist.

Small kidswear launch review in a sample room

Why 150–200 Pieces per Style Is a Sensible Launch Quantity

There is a useful middle ground between a 20-piece micro run and a 1,000-piece production commitment. For many new kidswear labels, 150–200 pieces per style sits close to that middle.

Imagine you are launching five styles at 180 pieces each. That is 900 garments in total. If the collection is focused, the number is large enough to create proper product photography, seed samples to creators, sell through your own site, and test a few wholesale accounts. At the same time, you are not tying up the same level of capital as a 5,000-piece launch.

This is where Kidswear Manufacturers for 150–200 Pieces per Style become particularly useful. You are not looking for a factory that merely tolerates a small order. You want one whose sourcing and production system can handle it without making your unit economics or product consistency collapse.

In practice, 150–200 pieces can work well when you keep several variables controlled:

• One or two colors per style rather than four or five
• A focused size range rather than every size from newborn to 12Y
• Shared fabrics across multiple styles where possible
• Repeat use of labels, hangtags, and packaging
• Decoration techniques that fit the quantity
• Clear product specifications before sampling begins

If you are still deciding whether your project should follow OEM, ODM, or private-label development, SIUKID’s children’s clothing OEM/ODM services page explains how those different starting points affect sampling and production.

Product development table for a 150–200-piece kidswear launch

The Most Important Question: Is the MOQ Per Style, Per Color, or Per Fabric?

This is the first thing I would clarify with every supplier.

Suppose a factory says its MOQ is 100 pieces. You may assume that you can order one style in two colors, 50 pieces each. But the factory may actually mean 100 pieces per style per color. Your two-color style therefore becomes 200 pieces.

Now add six styles:

• 6 styles
• 2 colors per style
• 100 pieces per color
• Total: 1,200 garments

That is very different from the 600 garments you may have expected.

Fabric can create another layer. A sewing factory might be comfortable cutting 180 hoodies, while the dye house requires a much larger minimum for a custom Pantone color. The garment MOQ and material MOQ are two separate constraints.

When you contact Kidswear Manufacturers for 150–200 Pieces per Style, ask these questions in writing:

1. Is your MOQ per style, per style/color, or per order?

2. Can sizes be mixed within the MOQ?

3. Can two colors share one style MOQ?

4. Is the fabric stock-supported or custom-produced?

5. What is the minimum for custom dyeing?

6. Do embroidery, printing, or custom trims create separate minimums?

7. Can unused fabric be held for a reorder?

A supplier that answers these clearly is already giving you useful information about how it manages production.

Quick Comparison: Manufacturers Worth Contacting

Manufacturer	Current Public MOQ Signal	Particularly Relevant For
SIUKID	Project-based MOQ confirmed after reviewing style, colors, materials, decoration, labels, and packing	Custom kidswear, complete small collections, OEM/ODM, decorative fashion, trial orders
Alamby Fashion	100 pieces per style / per color	Broad fully custom apparel, startups, boys’ and girls’ clothing
Hongyu Apparel	100 pieces per style / per color for full cut-and-sew customization on listed kids’ T-shirts	T-shirts, streetwear, casual basics, logo-led collections
MoonYao Kids	From 100 pieces per design	Girls’ dresses, tulle, occasionwear, boutique collections
Lezhou Garment	200 pieces per style on listed kidswear and general FAQ	T-shirts, shorts, hoodies, casualwear, streetwear

These are published starting points, not promises for every design. Always ask the manufacturer to quote your exact style before treating an MOQ as final.

Kidswear sample review with a manufacturer

1. SIUKID — Best Starting Point for a Coordinated Custom Kidswear Collection

SIUKID is the publisher of this guide, so I want to be transparent about that from the beginning. We are also one of the manufacturers I would put on the shortlist.

SIUKID is focused on children’s apparel and supports babywear, toddler clothing, girls’ apparel, and boys’ apparel across OEM, ODM, and private-label programs. Our current OEM/ODM information does not present one universal MOQ for every product. Instead, the order structure is reviewed around the style, color count, fabric, trims, decoration, labels, and packing.

That project-based approach matters at 150–200 pieces.

A 180-piece cotton T-shirt using an available jersey fabric is a very different sourcing problem from a 180-piece sequined dress requiring custom tulle, lining, beading, embroidery, and a special zipper. Treating both products as if they should have the same MOQ would not be realistic.

When I Would Contact SIUKID

SIUKID makes the most sense if you need a factory to look at your collection as a system, not just quote one isolated garment.

For example, your launch might contain:

• Two T-shirts
• One hoodie
• One jogger
• One casual dress
• One lightweight jacket

If several garments share fabric, rib, colors, labels, and packing, there may be ways to structure the sourcing more efficiently. The same applies to a girlswear collection using common tulle, lining, embroidery colors, or trims.

Our custom kids clothing techniques and craftsmanship page gives you a better idea of the decoration and product processes you can discuss during development, including embroidery, sequins, beading, prints, garment effects, and private-label details.

What I Would Send SIUKID Before Asking for a Final MOQ

Send a compact but complete brief:

• Front and back design images
• Tech pack if available
• Proposed quantity per style
• Color count
• Size range
• Fabric preference and GSM
• Decoration details
• Label requirements
• Packaging requirements
• Destination market
• Target launch date

If your design is early-stage, reference images can help start the conversation, but the final production product should be built around your own approved specifications.

Best fit: Brands that want a kidswear-focused development partner and are willing to structure their 150–200-piece launch around workable fabrics, colors, and production details.

2. Alamby Fashion — A Clear 100-Piece-Per-Color Starting Point

Alamby Fashion currently publishes a minimum of 100 pieces per style per color for fully customized clothing. Its stated product scope includes clothing for women, men, and children, with fabric sourcing, accessories, custom labels, care labels, and packaging support.

For a brand planning 150–200 pieces in one color, that published MOQ fits naturally.

It also works if you want exactly 200 pieces split across two colors only if Alamby agrees to a different structure; its public wording is 100 pieces per style per color, so you should not assume that 150 total can automatically be split into 75 + 75.

When Alamby Is Worth Comparing

I would add Alamby to your quote comparison for products such as:

• T-shirts
• Hoodies
• Shirts
• Trousers
• Dresses
• Skirts
• General boys’ clothing
• General girls’ clothing

Because it is a broader apparel manufacturer, I would ask for examples that are close to your exact children’s category, especially if you are making babywear, sleepwear, or garments with small decorative components.

Best fit: A startup that wants fully custom garments and is comfortable working around a 100-piece-per-style-per-color structure.

3. Hongyu Apparel — Strong Option for T-Shirts and Casual Cut-and-Sew

Hongyu Apparel is particularly easy to evaluate if your launch is centered on T-shirts or casual streetwear, because several of its current kids’ T-shirt pages publish separate minimums for blanks, logo customization, and full custom cut-and-sew.

On those listed products, Hongyu currently states:

• 50 pieces for blank garments with mixed styles/colors/sizes
• 50 pieces for some logo/private-label customization
• 100 pieces per style per color for full clothing customization

That distinction is useful because it prevents one of the most common sourcing misunderstandings: confusing a decorated stock garment with a genuinely custom product.

When I Would Put Hongyu on the Shortlist

Hongyu is most relevant if your 150–200-piece launch includes:

• Basic-fit children’s T-shirts
• Oversized T-shirts
• Graphic tees
• Streetwear
• Simple sweatshirts
• Casual matching pieces

If T-shirts are a large part of your first collection, you can also compare its offering with SIUKID’s children’s T-shirt manufacturing service, which covers fabric, sizing, decoration, sampling, QC, and branded packing from a kidswear-focused production perspective.

Where I Would Ask More Questions

For complex dresses, baby-specific construction, or technical outerwear, I would want to see recent comparable production before choosing a broad casualwear supplier. A factory accepting your quantity is only the first filter; category fit still matters more.

Best fit: Minimalist kidswear, T-shirt-led brands, casual collections, and streetwear launches where 150–200 pieces per color/style is commercially realistic.

4. MoonYao Kids — Worth Contacting for Girls’ Dresses and Boutique Fashion

MoonYao Kids currently states that fully custom clothing can start from 100 pieces per design. Its public product focus is strongly associated with children’s clothing, especially girls’ dresses, tulle dresses, flower-girl styles, cotton dresses, and related fashion categories.

That makes it a logical specialist to compare if your first collection is visually detailed rather than basics-driven.

Why Dress Specialization Matters at 150–200 Pieces

A dress may combine:

• Main fabric
• Lining
• Tulle
• Lace
• Zipper
• Embroidery
• Bow or sash
• Ruffles
• Decorative trims

At a small-to-medium production quantity, the cost of mistakes is high because you do not have a massive order over which to spread a remake or material correction.

I would therefore rather send a detailed dress to a factory that already handles layered girlswear than choose a basic T-shirt supplier purely because its MOQ is lower.

Best fit: Boutique girlswear, occasion dresses, flower-girl collections, tulle products, and fashion-led launches.

5. Lezhou Garment — Very Relevant When Your Target Is 200 Pieces

Lezhou Garment is one of the most straightforward matches when your quantity is at the top of the requested range. Its current website states a general MOQ of 200 pieces per style, and several listed children’s products also show 200-piece bulk minimums.

Its homepage currently describes a low-MOQ structure that can mix four customized sizes and two colors, although you should confirm that this applies to your exact fabric and product.

When I Would Contact Lezhou

Lezhou makes the most sense for:

• Children’s T-shirts
• Oversized sets
• French-terry shorts
• Hoodies
• Sweatshirts
• Joggers
• Tracksuits
• Acid-wash or casual streetwear

This is a good example of why Kidswear Manufacturers for 150–200 Pieces per Style should be compared by product type. A 200-piece streetwear set and a 200-piece layered party dress may have the same quantity but require very different suppliers.

Best fit: Brands planning a 200-piece style quantity in casualwear, knitwear, or streetwear categories.

Which Factory Should You Contact First?

If you only have time to start three conversations, I would choose them based on the collection rather than the published MOQ.

For a Mixed Everyday Kidswear Collection

Start with:

1. SIUKID

2. Alamby Fashion

3. Hongyu Apparel

This makes sense for collections containing T-shirts, hoodies, pants, casual dresses, and similar commercial products.

For Boutique Girlswear

Start with:

1. SIUKID

2. MoonYao Kids

3. Alamby Fashion

Here, I would pay more attention to sample-room capability, fabric handling, lining, decorative workmanship, and fit than to a small price difference.

For Streetwear or Casual Knitwear

Start with:

1. Lezhou Garment

2. Hongyu Apparel

3. SIUKID

If your launch contains jackets as well as knitwear, it is worth reviewing SIUKID’s children’s jacket manufacturing process because outerwear introduces additional construction, lining, closure, trim, and fit decisions.

How to Make a 150–200-Piece Order Easier for the Factory to Produce

Selecting the right factory is only half the job. The way you design the collection can make the difference between a commercially sensible small run and an unnecessarily expensive one.

Use Fewer Base Fabrics

This is one of the first things I look for when reviewing a new collection.

Suppose you have six styles:

• T-shirt
• Long-sleeve tee
• Casual dress
• Sweatshirt
• Jogger
• Short

You could source six completely different fabrics. Or you could build the collection around two core materials:

Fabric A: Cotton jersey

• T-shirt
• Long-sleeve tee
• Casual dress

Fabric B: French terry

• Sweatshirt
• Jogger
• Short

The garments still look different because silhouette, color, print, embroidery, and trim can change. But your fabric purchase becomes much more meaningful.

For Kidswear Manufacturers for 150–200 Pieces per Style, this type of material consolidation can be more useful than negotiating another 20 pieces off the MOQ.

Keep the First Color Plan Tight

A first collection does not need every style in four colors.

If you have six styles at 180 pieces each:

• One color per style = 1,080 garments
• Two colors per style at 180 pieces per color = 2,160 garments

That is a huge inventory difference.

You can still create a cohesive collection by using a tight palette across styles. For example, cream, dusty blue, sage, and navy can repeat in different combinations without every product being offered in every color.

Reuse Trims and Branding Components

Use the same where practical:

• Main woven label
• Size label
• Care-label format
• Hangtag
• Polybag format
• Barcode placement
• Basic zipper finish
• Snap finish

Every custom component can have its own supplier MOQ. Reusing components helps your factory purchase efficiently and also strengthens brand consistency.

If private labeling is part of your launch, SIUKID’s FAQ on labels, customization, and production is useful background before you finalize your brief.

Do Not Spread 150 Pieces Across Too Many Sizes

A wide size range can make a modest order surprisingly fragmented.

For example, 150 pieces spread across 12 sizes gives you only 12.5 units per size on average before you even account for demand differences.

For a new label, it may be more practical to begin with a focused range such as:

• 2T
• 3T
• 4T
• 5T
• 6Y

Then use your first season’s sales data to decide where to expand.

What a Strong Factory Inquiry Looks Like

A surprisingly large number of sourcing conversations start with something like:

“Hi, I need kids clothes. 150 pcs. Send price.”

There is no reliable way to quote that accurately.

A better inquiry gives the manufacturer enough information to assess both feasibility and cost.

Include These Details

• Product sketches or reference photos
• Tech pack if available
• 150–200-piece target per style
• Number of colors
• Size range
• Fabric composition
• Fabric weight or GSM if known
• Print or embroidery requirements
• Label and hangtag requirements
• Packaging
• Target market
• Target delivery date

At SIUKID, this is the point where a quantity becomes a production project rather than just a number. We can review whether the material structure fits the run, whether the decoration requires a separate minimum, and what needs to be approved during sampling.

Compare Factory Questions, Not Just Factory Answers

One of the best signals during sourcing is the quality of the questions a supplier asks you.

A factory that has properly reviewed your file may ask:

• Is the GSM before or after washing?
• Is this measurement half chest or full circumference?
• Does the embroidery placement grade across sizes?
• Is the rib custom dyed to the body fabric?
• Should the zipper color match the fabric or trim reference?
• Is this product intended to be sold as sleepwear?
• Which market will the product be sold in?

These questions can feel slower than an immediate “Yes, no problem,” but I generally trust the detailed conversation more.

When comparing Kidswear Manufacturers for 150–200 Pieces per Style, pay attention to who is trying to understand the product before promising the result.

Sample Before You Commit to Bulk Production

Even when your order is only 150 pieces, do not treat sampling as optional.

Your sample is where you confirm:

• Fabric hand feel
• Fabric weight
• Color
• Fit
• Measurements
• Neck opening
• Sleeve and body proportions
• Stitching
• Seam finishing
• Print placement
• Embroidery quality
• Trim position
• Labels
• Overall appearance

Then wash it if the garment is designed to be washed.

A cotton T-shirt that measures perfectly before laundering may shrink outside tolerance if fabric behavior was not controlled. A decorated dress may look good on a hanger but feel uncomfortable because the internal finishing was not reviewed properly.

Build One Final Approval Standard

Before production, consolidate your approvals into one controlled set of information:

• Approved sample
• Final measurement chart
• Approved fabric
• Approved colors
• Artwork
• Label files
• Trim references
• Packing instructions

Avoid managing bulk production through scattered messages such as “use the sleeve from sample 2, neckline from sample 1, and new embroidery from WhatsApp.” That is how ambiguity enters the production floor.

QC measurement for small-batch kidswear production

Do Not Let the Lowest MOQ Distract You From Total Cost

A 100-piece MOQ can look cheaper than a 200-piece MOQ, but the commercial picture may be the opposite.

Consider two factories:

Factory A

• MOQ: 100
• Unit price: $7.10
• Custom label extra
• Polybag extra
• Fabric surcharge
• Sampling revisions extra
• Final price subject to bulk fabric confirmation

Factory B

• MOQ: 180
• Unit price: $8.00
• Approved fabric specification included
• Labels and standard packing included
• Clear sampling process
• Clear QC process

Factory A looks cheaper until you calculate the actual landed, sellable product.

For a startup, predictability has financial value. You need to know how much cash the collection will consume before you pay the deposit.

Children’s Clothing Compliance Still Matters on a Small Order

A small order is still a commercial children’s product.

If you sell into the United States, the applicable requirements depend on the garment and its components. The U.S. Consumer Product Safety Commission explains that children’s products may require third-party testing and a Children’s Product Certificate, and the importer is responsible for certification of overseas-manufactured children’s products when applicable. Review the CPSC’s Children’s Product Certificate guidance before assuming the factory alone carries the compliance responsibility.

The CPSC also provides an online sellers’ safety guide specifically for businesses importing or selling consumer products online, including children’s products.

Textile labeling is a separate issue. The U.S. Federal Trade Commission explains that most textile products need disclosures such as fiber content, country of origin, and the identity of the manufacturer or responsible marketer, while apparel is also subject to care-label requirements. The FTC’s apparel labeling guidance is a useful starting point.

This is why I recommend telling every factory your destination market during the first inquiry rather than after production.

One Factory or Several for Your First Launch?

If your collection is technically compatible, I usually prefer one primary factory for the first order.

Using one supplier can simplify:

• Sampling communication
• Fabric approvals
• Color standards
• Labels
• Packaging
• QC
• Payment
• Shipping

But there is an important exception.

If your collection contains two products that require completely different manufacturing systems—say a layered tulle occasion dress and a seam-sealed technical rain jacket—specialist suppliers may be safer even if that means managing two factories.

The goal is not to minimize the number of suppliers at all costs. It is to avoid asking a factory to make products that sit outside its normal competence.

Moderate-volume kidswear production on a sewing floor

A Practical 150–200-Piece Launch Structure

If I were reviewing a new brand’s first production plan, I would much rather see a disciplined collection like this:

Example A: Focused Everyday Collection

• 5 styles
• 180 pieces per style
• 1–2 colors
• 2 core fabrics
• 5 sizes
• Shared labels and packing
• Total: approximately 900 pieces

than this:

Example B: Overextended First Collection

• 10 styles
• 4 colors per style
• 12 sizes
• Different fabric for each style
• Different trims for each garment
• Multiple print methods

The second collection may look exciting in a design deck, but it is much harder to source efficiently at low volume.

Kidswear Manufacturers for 150–200 Pieces per Style can usually help you more when your design architecture respects the economics of small-batch sourcing.

Questions to Ask Before You Pay a Deposit

I would send these questions to the final two factories on your shortlist.

MOQ and Materials

1. What is the final MOQ for this exact style?

2. Is it per color?

3. Can sizes be mixed?

4. Is the fabric stock-supported?

5. Is custom dyeing required?

6. Are there separate trim or decoration minimums?

Sampling

7. What is the sample fee?

8. What does the sample fee include?

9. What is the estimated sample lead time?

10. How are revisions handled?

11. Will I approve a final pre-production standard?

Production

12. Which facility will make my order?

13. Which operations are subcontracted?

14. What is the bulk production estimate after final approval?

15. How is inline QC handled?

16. Is final inspection performed before packing?

17. Can I arrange third-party inspection?

Branding and Packing

18. Can you produce my main, size, and care labels?

19. Can you manage hangtags and barcode stickers?

20. What packing is included in the quote?

Commercial Terms

21. What deposit is required?

22. When is the balance due?

23. Which Incoterm is quoted?

24. What happens if the agreed specification cannot be met?

A professional supplier should not be offended by these questions. They are normal parts of a serious B2B purchase.

Red Flags I Would Take Seriously

A low MOQ should never persuade you to ignore obvious warning signs.

Be cautious when:

• Every question receives “yes, no problem” without technical discussion
• The supplier refuses to explain where production takes place
• The quoted fabric changes after sampling without clear approval
• Bulk production is encouraged before the sample is finalized
• The bank account changes suddenly without independent verification
• Testing and labeling questions are dismissed
• The quotation is vague about what is included
• Lead times appear unrealistically short for custom materials
• Sample workmanship does not match the category you intend to sell

The purpose of a small first order is to reduce risk. Do not reintroduce that risk by choosing a supplier purely because it offers the smallest number.

How I Would Shortlist Kidswear Manufacturers for 150–200 Pieces per Style

Here is the actual sequence I would use.

Step 1: Start With Five Candidates

For this quantity range, begin with:

• SIUKID
• Alamby Fashion
• Hongyu Apparel
• MoonYao Kids
• Lezhou Garment

Step 2: Remove the Wrong Product Specialists

If you are making tulle dresses, a streetwear-focused factory drops down the list.

If you are making oversized cotton tees, a dress specialist may drop down the list.

Step 3: Send the Same Brief

Do not send detailed files to one supplier and a one-line message to another. You will not get comparable quotes.

Step 4: Compare Feasibility Before Price

Ask:

• Can the fabric be sourced?
• Is the MOQ genuinely workable?
• Can the color structure be achieved?
• Does the factory understand the construction?

Step 5: Sample With the Best One or Two

At this point, actual workmanship becomes more important than website promises.

Step 6: Choose the Factory That Makes the Launch Repeatable

Your first production run is not the end goal. You want a supplier that can reproduce the approved product when one style sells out.

Frequently Asked Questions

Can I really manufacture custom kidswear at 150 pieces per style?

Yes, depending on the garment. Alamby and MoonYao currently publish starting minimums below 150 for certain fully custom programs, Hongyu publishes 100 pieces per style/color for full customization on listed kids’ T-shirts, and Lezhou publishes 200 pieces per style. SIUKID evaluates the MOQ by project rather than presenting one universal minimum.

Is 150 pieces enough for two colors?

Sometimes, but do not assume it. If the factory requires 100 pieces per style per color, two colors would require 200 pieces. Stock-supported fabric can sometimes provide more flexibility than custom-dyed fabric.

Can I mix sizes within 150–200 pieces?

Many manufacturers allow mixed sizing, but the allowed number of sizes and minimum quantity per size vary. Confirm your proposed ratio before sampling.

Is a 150-piece private-label order the same as OEM?

Not necessarily. Private label may involve adding your branding to an existing or adapted product, while OEM normally means producing to your own specifications. The cost and MOQ can be very different.

Will my price be much higher at 150 pieces than at 500?

Usually the unit price is higher because sample development, pattern work, cutting setup, printing or embroidery setup, QC, and order management are spread across fewer units. Fabric and trim surcharges may also matter.

Should I choose stock fabric for my first collection?

Stock-supported fabric can be a smart way to make a lower quantity practical, provided the fabric meets your quality requirements and the supplier can explain reorder availability.

How many styles should I launch?

For many new brands, four to eight well-developed styles are easier to manage than a very wide assortment. The right number depends on your budget, sales channel, and category.

Which Kidswear Manufacturers for 150–200 Pieces per Style are best for a startup?

There is no single best supplier. SIUKID is worth contacting for kidswear-focused custom development; Alamby has a clear 100-piece-per-style/color structure; Hongyu is relevant for casual cut-and-sew; MoonYao is strong for girls’ dresses; and Lezhou is a natural comparison when you can reach 200 pieces per style.

Finished kidswear prepared for small launch shipment

Final Thoughts

If you are searching for Kidswear Manufacturers for 150–200 Pieces per Style, do not reduce the decision to a spreadsheet column labeled MOQ.

Your real objective is to build a first collection that is manufacturable, sellable, and repeatable.

That means the factory must fit the product, but the product also has to fit the economics of the quantity.

Use fewer base fabrics where possible. Keep the first color plan controlled. Reuse labels and trims. Choose a sensible size range. Finalize the sample before bulk production. Tell the factory your destination market early. And compare suppliers on communication, product expertise, quality control, and production transparency—not only unit price.

For a 150–200-piece launch, I would begin the conversation with SIUKID, Alamby Fashion, Hongyu Apparel, MoonYao Kids, and Lezhou Garment, then narrow the list according to your product category.

At SIUKID, the most useful inquiry is not simply “Can you make 180 pieces?” It is a brief that shows us what those 180 pieces actually are: the fabric, colors, sizing, decoration, labels, target market, and timing. Once those details are clear, we can review the production structure and tell you whether the proposed run makes sense or which part of the design should be adjusted.

That is the type of conversation you should look for from every manufacturer you contact.

Your first order does not need to be huge. It needs to give your brand a product you are confident putting in front of customers—and a production standard you can order again when it sells.